Shot peening is a means of cold working the surface of metal parts by means of hail or blast of round metal shot directed against surface. The impact on the surface will indent the surface metal surface causing the plastic flow and work hardening the surface metal. The hardening of the surface increases its tensile strength and yield point. To learn about shot peening Erie PA should be the place to prioritize.
This procedure is very useful to the metal. The surface is able to prevent fatigue failures since the metal is upset and is placed under compression. This process is merely a reconstruction of an old art which needs a one to go back in history so as to fully comprehend.
Cold working existed in several different forms in ancient times. The commonest was hammer hardening. Hammering was applied in hardening arrow heads and spear heads in the ancient Greece. Spear heads and arrow heads made this way were stronger and penetrated the skin of animals with much ease. Body armors used in wars were also hardened using this technique. History has is that the armors were so strong that arrows heads and spears bend upon impact.
The surfaces are made even better using advanced techniques by metallurgists in the current times. The modern technology has made it easier to determine and measure any increases in strength and hardness. This has made determination of the percentage which provides optimum results easier. This has made it easier to produce standardized size metals that are quality controlled and assures reproducibility.
There are various types of shot used for peening. The peening shots can be purchased from any company that deals with metals but one has to be careful not to buy one that is of bad quality. The shot has to be well rounded and then screened to a certain definite size range. The shot hardness must be equal to or more than the hardness of metal that is being peened.
Different types of shots include the steel shot. It is of great use where fatigue strength is of concern. Compared to chilled iron shots, steel shots tend to be more expensive. The main disadvantage of using chilled iron shots is its policy of separation. Peening conditions requires a broken shot to be split-up and removed from the peening shot.
Cur wire shot is another type and is generally a material applied in peening applications. To manufacture it, short lengths of steel wire are clipped together. This kind of shot is blasted against the scrap steel until is rounds out as per peening specifications. Besides decreasing the life span of the shot the process is also consumes a lot of time.
The fatigue life cycle of stressed parts can be increased by the use of peening. This procedure is helpful in making parts straight. It can also be applied in different areas like eliminating fret corrosion and prevention of stress corrosion crack.
This procedure is very useful to the metal. The surface is able to prevent fatigue failures since the metal is upset and is placed under compression. This process is merely a reconstruction of an old art which needs a one to go back in history so as to fully comprehend.
Cold working existed in several different forms in ancient times. The commonest was hammer hardening. Hammering was applied in hardening arrow heads and spear heads in the ancient Greece. Spear heads and arrow heads made this way were stronger and penetrated the skin of animals with much ease. Body armors used in wars were also hardened using this technique. History has is that the armors were so strong that arrows heads and spears bend upon impact.
The surfaces are made even better using advanced techniques by metallurgists in the current times. The modern technology has made it easier to determine and measure any increases in strength and hardness. This has made determination of the percentage which provides optimum results easier. This has made it easier to produce standardized size metals that are quality controlled and assures reproducibility.
There are various types of shot used for peening. The peening shots can be purchased from any company that deals with metals but one has to be careful not to buy one that is of bad quality. The shot has to be well rounded and then screened to a certain definite size range. The shot hardness must be equal to or more than the hardness of metal that is being peened.
Different types of shots include the steel shot. It is of great use where fatigue strength is of concern. Compared to chilled iron shots, steel shots tend to be more expensive. The main disadvantage of using chilled iron shots is its policy of separation. Peening conditions requires a broken shot to be split-up and removed from the peening shot.
Cur wire shot is another type and is generally a material applied in peening applications. To manufacture it, short lengths of steel wire are clipped together. This kind of shot is blasted against the scrap steel until is rounds out as per peening specifications. Besides decreasing the life span of the shot the process is also consumes a lot of time.
The fatigue life cycle of stressed parts can be increased by the use of peening. This procedure is helpful in making parts straight. It can also be applied in different areas like eliminating fret corrosion and prevention of stress corrosion crack.
About the Author:
When you are searching for information about shot peening Erie PA residents can come to our web pages online today. More details are available at http://www.peening-consultants.com now.
No comments:
Post a Comment